Regenerative catalyst oxidizer
Brand Baina
Product origin Jiangsu Yixing, China
Delivery time 8 weeks
Supply capacity 10 sets/month
1. Suitable for the treatment of VOCs with low concentration and a certain air volume.
2. Removal efficiency is no less than 98%.
3. The VOCs shall not contain elements such as halogen, sulfur, phosphorus and particles.
1. Working principle
Put certain number of catalyst on top of ceramic in regenerative chamber of RTO, VOCs is preheated to 280~350°C by ceramic, then come into catalytic oxidation chamber to be oxidized and decomposed by catalyst, hot exhaust exchange its heat to ceramic in another regenerative chamber and is cooled down then emission out.
2. Application
(1) The composition of VOCs can not be complex, can not contain halogen, sulfur, phosphorus and dust.
(2) Concentration of VOCs can not be high, in other words the thermal insulation temperature rise must be less than 300°C.
(3) Heat recovery method: Steam, hot water, hot conduction oil and hot air.
(4) The following information should be provided while consulting: volume, temperature, pressure, composition, concentration of each component.
Factory Show
Depending on the Volume, composition, and concentration of the VOCs,if the volume is small (normally less than 10000Nm3/h) and concentration is high(Calorific value is more than 1000Kcal/Nm3), then the first choice is thermal oxidizer(TO). If the volume is large(more than 5000m3/h) and concentration is small (normally less than 5000mg/m3),then regenerative thermal oxidizer will be considered. If t...more
